The anchor sits entirely in the insulation so allowing for fixtures to be installed without cold bridging. The special shape of the fixings allows secure fixing through plaster generally without the need for pre drilling (although with some insulations they do work better with a small pre drilled hole).
The FID 90 for boards >90mm and for heavier loads.
FID is fixed by driving with either a Torx or Hex driver
The areas of application are:
- Insulated Façade construction - External Wall Insulation (EWI)
- Insulating construction – Internal wall insulation (IWI)
- Acoustic construction applications
The FID can be set in insulating boards with a cordless screwdriver or by hand. The special spiral thread taps itself in the insulating board.
Fixtures are fixed with a 6 mm screw for the FID 90.
Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after pre-positioned installation.