Sheet Materials




Grid  List 
Page:
  1. 1
  2. 2
  1. Fermacell 12.5mm Square Edge 2400x1200mm Racking Board

    Fermacell 12.5mm Square Edge 2400x1200mm Racking Board

    £21.76

    THIS PRODUCT REQUIRES AN OVERSIZE PALLET TO TRANSPORT SO IS NOT AVAILABLE TO BUY ONLINE. PLEASE CALL US FOR  CARRIAGE RATES

    FF

    Fermacell is a high performance multi-purpose dry lining board for walls ceilings and floors. It is a fibre reinforced gypsum fibreboard manufactured from a high proportion of recycled materials in a fully recycling process. When it is installed as a partition wall it combines the performance properties of solid blockwork with speed and flexibility of conventional drywall construction.

    Fermacell is used for dry-lining boards for walls, ceilings and floors. fermacell Gypsum Fibreboard has good fire retardant properties, and has  high levels of acoustic insulation - Rw 43dB from a single layer partitions with no insulation.

    Fermacell Gypsum Fibreboards are made from recycled gypsum, recycled newspapers and water, mixed in a homogeneous mass and then cured. Fermacell boards are very strong and durable so radiators, kitchen cabinets and TV's can be fixed without any additional patressing or support. In some cases it is used as an alternative to brickwork, CP and sheathing boards due to its high performance

    Price is per board.

    We sell the full range of Fermacell boards and ancillaries please call us for details or pricing.

    Learn More
  2. Heraklith Woodwool Insulation Board

    Heraklith Woodwool Insulation Board

    £11.14

    Heraklith panels are multifunctional boards with several uses. In the UK the main uses are as acoustic and thermal insulation panels to reduce noise, as a plaster carrying board internally and with EWI as a breathable base board for lime and other breathable renders.

    Price is per board: This product can only be ordered by calling 01793 847 444 Learn More
  3. Woodwool Slab 600mm x 1200mm

    Woodwool Slab 600mm x 1200mm

    £6.27

    Woodwool is a building board suitable for carrying lime or clay renders and plasters. It is made from mineralised wood, giving a board that is breathable "vapour permeable", rot resistant and durable. Due to its high timber content, there is no problem with disposal and gives off no harmful gases or vapours when burnt 

    Each 15mm thick Woodwall board measures  600x1200mm and weighs 5.7Kg's which is the equivalent of 8Kg's per square metre.

    Each 25mm thick Woodwall board measures  600x1200mm and weighs 8.3Kg's which is the equivalent of 11.5Kg's per square metre.

    Prices are per board

    Learn More
  4. Steico Protect DRY Internal & External Wood Fibre Render/Plaster Carrying Board 1325mm x 600mm. 40, 60 & 80mm thick

    Steico Protect DRY Internal & External Wood Fibre Render/Plaster Carrying Board 1325mm x 600mm. 40, 60 & 80mm thick

    BOARD ONLY, for the render system please see "Ecomerchant EWI"

    Steico Protect DRY is a natural render carrying wood fibre insulation board with a tongue and groove profile manufactured in accordance with EN 13171, designed as an external sheathing board for timber frame constructions or for direct to masonry applications in external wall insulation systems where the render is applied directly to the board.

    It is quite common for architects and designers to specify Protect DRY boards in certain building applications and in combination with a separately specified finish or render system, this is why we sell the boards individually and not just as part of our Ecomerchant EWI Protect System. When sold separately as individual boards Ecomerchant offer no guarantees or warranties for Protect DRY when used in conjunction with renders, plasters or finishes.

    For ultimate peace of mind we recommend our certified, CE marked Ecomerchant EWI Protect System

    Board size 1325mm x 600mm. Board Coverage: 0.747m2 / board

    Available in 40mm, 60mm & 80mm thicknesses 

    Learn More
  5. Durelis VapourBlock Structural Airtight Construction Board With Integral Vapour Barrier 2400mm x 1196mm x 12mm

    Durelis VapourBlock Structural Airtight Construction Board With Integral Vapour Barrier 2400mm x 1196mm x 12mm

    Durelis VapourBlock is a high density ultra low formaldehyde chipboard with a factory fitted transparent airtightness and vapour control layer called TopFinish on one side. This finish guarantees consistent airtightness and vapour control it also eliminates the requirement for additional membranes.

    This board is specifically designed as a more reliable airtightness and vapour control layer compared to conventional plywood or OSB. The board is for internal use, it is classified as a structural board suitable for use in humid conditions (P5) equivalent to OSB3.

    If you want to see how airtight this board is compared to OSB watch the video by clicking on the 'Video' tab below

    VapourBlock vapour barrier has a constant high μ value of 185 (12mm) over the whole surface of the board. This is in contrast to traditional wooden board materials for which the μ value is significantly lower and may vary considerably. 

    The board is extremely airtight (< 0.001³/ m²/h/Pa at 50Pa;12mm) please remember it is important to seal all joints and cracks with a suitable airtight tape.

    Durelis VapourBlock provides

    Ecomerchant FSC Certification

    1. Vapour control,

    2. Structural requirements,

    3. Airtightness

    Price is per board

    NOTE: THIS PRODUCT REQUIRES AN OVERSIZE PALLET SO IS AVAILABLE TO BUY ONLINE PLEASE CALL TO ORDER

      Learn More
    1. Econic Render Carrying Board 1200mm x 2400mm 12mmEconic Render Carrying Board 1200mm x 2400mm 12mm 2

      Econic Render Carrying Board 1200mm x 2400mm 12mm Breathable, Fire Resistant, Cat 1 Racking

      £28.25

      Please Note this stock item requires an oversize pallet to transport so is not available to buy online.  Please call us for carriage rates.  To order please call 01793 847 444 or email info@ecomerchant.co.uk

      A high performance, vapour open, moisture resistant carrier board compatible with polymeric, acrylic, lime, silicone and cement render applications. UKAS tested to ETAG004 and MOAT 22 and proven to withstand extreme climatic conditions.

       Key benefits

      • Excellent dimensional stability
      • Excellent bond strength
      • Severe Duty Rated for impact
      • Euroclass A1 rated for reaction to fire
      • Easy to handle and cut on site
      • Vapour permeable
      • Weather resistant – will not delaminate or bow
      • High pull-out strength – screw fix or nail
      • Mould and mildew resistant
      • Verified low embodied carbon
      • 100% non hazardous material
      • Category 1 racking strength
      • Suitable for offsite pre-rendered panels
      • Also suitable for exterior paint application

      The board is non- toxic and free from formaldehyde, benzenes, solvents and oil based chemicals. The boards are certified as free of hazardous or deleterious material. Unlike almost all other Magnesium Oxide or Cement particle boards Econic is vapour open.

      Vapour open with the highest levels of fire protection and racking strength  Econic Board is setting new standards in building performance there really is nothing else like this on the market for use in timber or steel frame  for direct applied render finish.

      This board will outperform all competitors and easily withstand the vagaries of the UK climate.

      The board is

      • non- toxic
      • free from formaldehyde,
      • Contains no benzenes,
      • Contains no solvents
      • Contains no oil based chemicals.
      • Certified as free of hazardous or deleterious material.

      Econic has a wide range of other advantages over comparative boards the key ones are

      • Breathable
      • Fire resistant
      • Ultra low environmental impact

      Price is per board

      Please Note this stock item requires an oversize pallet to transport so is not available to buy online. Please call us for carriage rates. To order please call 01793 847 444 or email info@ecomerchant.co.uk

      Learn More
    2. Econic General Purpose Sheathing Board 1200mm x 2400mm in  9mm or 12mm Breathable, Fire Resistant, Cat 1 Racking

      Econic General Purpose Sheathing Board 1200mm x 2400mm in 9mm or 12mm Breathable, Fire Resistant, Cat 1 Racking

      £23.63

      Please Note this stock item requires an oversize pallet to transport so is not available to buy online.  Please call us for carriage rates.  To order please call 01793 847 444 or email info@ecomerchant.co.uk

      Econic general purpose sheathing board is a high quality, versatile, breathable, non combustible sheathing for timber frame, steel frame, closed panels, SIPS, pre-insulated panels and a range of modular systems. The board is UKAS tested and proven for fire, structure and hygrothermal performance.

      The board is non- toxic and free from formaldehyde, benzenes, solvents and oil based chemicals. The boards are certified as free of hazardous or deleterious material. Unlike almost all other Magnesium Oxide or Cement particle boards Econic is vapour open.

      Econic board is suitable for applying a variety of bonded applications they can be directly rendered, painted, tiled or plastered. Econic Board can also be used as a backer board, as decorative panels or for internal wall systems, and on celings for 30 minute fire protection.

      Vapour open with the highest levels of fire protection and racking strength  Econic Board is setting new standards in building performance there really is nothing else like this on the market for use in timber or steel frame or for direct applied render finish.

      This board will outperform all competitors and easily withstand the vagaries of the UK climate.

      The board is

      • non- toxic
      • free from formaldehyde,
      • Contains no benzenes,
      • Contains no solvents
      • Contains no oil based chemicals.
      • Certified as free of hazardous or deleterious material.

      Econic has a wide range of other advantages over comparative boards the key ones are

      • Breathable
      • Fire resistant
      • Ultra low environmental impact

      Price is per board

      Please Note this stock item requires an oversize pallet to transport so is not available to buy online. Please call us for carriage rates. To order please call 01793 847 444 or email info@ecomerchant.co.uk

      Learn More
    3. Steico Therm Internal T&G

      Steico Therm (T&G) Internal - Wood Fibre Insulation Board

      Steico Therm Rigid insulation board T&G edged is made from natural wood fibres. The tongue and groove edge adds the following advantages over the square edge board.

      1. Easier to fix to studs and rafters with an OSB backer board
      2. Quicker and easier to install
      3. Improves airtightness 
      4. Improved joint strength
      5. Less likely to leave gaps when installing

      Steico Therm Rigid insulation board T&G edged is normally used for internal renovations where the structure is built on studs (timber frame or a stud sub frame).  Using the T&G profile for stud applications helps minimise potential cracking of the plaster coat the T&G profile locks the boards together, effectively supporting the joints but the use of an OSB backer board is recommended.

      Like the square edge board Steico Therm T&G is suitable for wall and roof applications it can also be used as sub screed insulation (please ask us for technical guidance for sub screed use)

      Easy and fast fixing wood fibre board with superior insulating properties in both summer and winter. High compressive strength, water vapour open (helps regulate the indoor climate of a building) & fire resistant.

      The board has a light side (machine sanded in the factory) and a darker unsanded side, the lighter side is the plaster carrying face.

      FSC® accredited, ecologically friendly, recyclable.

      1200mm  x 380mm, each board covers 0.434m2

      Price is per board

      Learn More
    4. Steico Therm 2

      Steico Therm (S/E) Internal - Wood Fibre Insulation Board

      £3.12

      Steico Therm rigid insulation board is made from natural wood fibres and is suitable for wall applications and it can also be used as sub screed insulation (please ask us for technical guidance for sub screed use)

      Easy and fast fixing wood fibre board with superior insulating properties in both summer and winter. High compressive strength, water vapour open (helps regulate the indoor climate of a building) fire resistant.

      FSC® accredited, ecologically friendly, recyclable.

      The board has a light side (machine sanded in the factory) and a darker unsanded side, the lighter side is the plaster carrying face.
      .

      1350mm x 600mm each board covers 0.81m2

      Learn More