Alis 579 Coloured Decking Oil 0.375 Litre
Alis 579 Decking Oil is a water resistant, open-pored oil for the first treatment and care of decking and wooden facades. Alis Decking Oil dries quickly and refreshes wooden surfaces. It does not chip or flake and stays smooth and easy to care for.
Alis Decking Oil is applied with a brush on dry surfaces with two coats on wooden decks and with three coats on wooden facades. The air temperature should be warmer than 10°C.
Suitable for: Exterior timber e.g. decks , window and door frames. Also ideal as an initial external wood treatment, and for the maintenance and protection of exterior timber.
Alis Decking Oil is available in 11 different colours
Cleaning Up: We recommend Svalos Thinner No. 222 to clean equipment immediately after use. Alternatively mineral turps may be used
This can only be determined by doing a test application.
- For profiled (fluted) wood: First coat: 1 liter is sufficient for approx. 7 m2 (75 ft2 ), i.e. 140ml/m². Second coat: 1 liter is sufficient for approx. 35 m2 (377 ft2 ), i.e. 30ml/m².
- For planed wood: First coat: 1 liter is sufficient for approx. 20-25 m2 (215-269 ft2 ), i.e. 40-50ml/m². Second coat: 1 liter is sufficient for approx. 40-50 m2 (430-538 ft2 ), i.e. 20-25ml/m².
- For sanded wood (120-150 grain): First coat: 1 liter is sufficient for approx. 35-50 m2 (377-538 ft2 ), i.e. 20-30ml/m². Second coat: 1 liter is sufficient for approx. 55-70 m2 (529-753 ft2 ), i.e. 14-18ml/m².
Drying time At 23°C (73°F) and 50% relative humidity: approximately 5 to 8 hours. The 2nd and 3rd coat can be applied after approximately 18 hours. At higher temperatures, please consider shorter drying times, and in lower temperatures, longer drying times.
Linseed oil, wood oil, linseed oil - wood oil - stand oil, orange oil, isoaliphates, linseed oil - stand oil – natural resin ester, earth - and mineral pigments, dehydrated amino sugar and drying agents free of lead.
Write Your Own Review
Availability: In stock