Econic Render Carrying Board 1200mm x 2400mm 12mm Breathable, Fire Resistant, Cat 1 Racking

Please Note this stock item requires an oversize pallet to transport so is not available to buy online.  Please call us for carriage rates.  To order please call 01793 847 444 or email info@ecomerchant.co.uk

A high performance, vapour open, moisture resistant carrier board compatible with polymeric, acrylic, lime, silicone and cement render applications. UKAS tested to ETAG004 and MOAT 22 and proven to withstand extreme climatic conditions.

 Key benefits

• Excellent dimensional stability
• Excellent bond strength
• Severe Duty Rated for impact
• Euroclass A1 rated for reaction to fire
• Easy to handle and cut on site
• Vapour permeable
• Weather resistant – will not delaminate or bow
• High pull-out strength – screw fix or nail
• Mould and mildew resistant
• Verified low embodied carbon
• 100% non hazardous material
• Category 1 racking strength
• Suitable for offsite pre-rendered panels
• Also suitable for exterior paint application

The board is non- toxic and free from formaldehyde, benzenes, solvents and oil based chemicals. The boards are certified as free of hazardous or deleterious material. Unlike almost all other Magnesium Oxide or Cement particle boards Econic is vapour open.

Vapour open with the highest levels of fire protection and racking strength  Econic Board is setting new standards in building performance there really is nothing else like this on the market for use in timber or steel frame  for direct applied render finish.

This board will outperform all competitors and easily withstand the vagaries of the UK climate.

The board is

• non- toxic
• free from formaldehyde,
• Contains no benzenes,
• Contains no solvents
• Contains no oil based chemicals.
• Certified as free of hazardous or deleterious material.

Econic has a wide range of other advantages over comparative boards the key ones are

• Breathable
• Fire resistant
• Ultra low environmental impact

Price is per board

Please Note this stock item requires an oversize pallet to transport so is not available to buy online. Please call us for carriage rates. To order please call 01793 847 444 or email info@ecomerchant.co.uk

A high performance, vapour open,moisture resistant carrier board compatible with polymeric,acrylic, lime, silicone and cement render applications.UKAS tested to ETAG004 andMOAT 22 and proven to withstandextreme climatic conditions.

The board is non- toxic and free from formaldehyde, benzenes, solvents and oil based chemicals. The boards are certified as free of hazardous or deleterious material. 

Key benefits

• Excellent dimensional stability
• Excellent bond strength
• Severe Duty Rated for impact
• Euroclass A1 rated for reaction to fire
• Easy to handle and cut on site
• Vapour permeable
• Weather resistant – will not delaminate or bow
• High pull-out strength – screw fix or nail
• Mould and mildew resistant
• Verified low embodied carbon
• 100% non hazardous material
• Category 1 racking strength
• Suitable for offsite pre-rendered panels
• Also suitable for exterior paint application

Econic Board Benefits

• High quality building board for fire, acoustic, structural, severe duty and hygrothermal applications.
• A1 non-combustible rated external sheathing for timber and steel frame.
• Vapour open render carrier, brick slip and tile backer boards.
• Suitable for SIPS, access panels, soffit linings, composite and decorative panels.
• Reduced in service costs in high circulation and multi occupancy zones
• High pull out strength supporting fixtures and fittings directly.
• Breathable assisting against the risks of interstitial condensation.
• 100% non-hazardous material with no off gassing.
• Easy to cut, joint, decorate and fix.
• Water and mould resistant.
• STA Approved Category C Fire solution.
• Category 1 racking board in 9mm thickness.
• Excellent bond strength.
• Fully Tested & Certified

Commitment to Quality

The Econic Performance Systems product range has been fully tested and certified by accredited UKAS test houses to demonstrate commitment to performance, quality control, health and safety.

Econic Render Carrier Boards have been tested to the following standards:

• Ceram UKAS approved ETAG 004Test Specification – Result Pass
• Hygrothermal Performance in ETAG 004 March 2000 Guideline for Technical Approval of External Thermal Insulation Composite Systems with Rendering

A full life cycle analysis conducted by the Centre for Energy and Built Environment verifies that Econic board has a carbon emission rating 20% of cement fibre boards

Testing has been done in accordance with recognised BS and EN standards confirming that the boards have proven qualities in terms of:

• All testing to BS & EN standards using notified 3rd party accreditation
• All products are certified as free of hazardous or deleterious material
• Full LCA undertaken and 3rd party verified as low carbon