Ecomerchant Protect EWI

full view icon

The Ecomerchant Protect system is suitable for use in masonry, timber frame and cross laminated timber construction, for either new build or renovation projects. Ecomerchant have partnered with Lime Green and Steico to produce a complete and comprehensive external render system. This system offers insulation boards, fixings, beads & mouldings and a lime based render. In developing this system our priority has been the production of a water vapour open, low impact system.


Grid  List 
Page:
  1. 1
  2. 2
  1. Steico Protect DRY Internal & External Wood Fibre Render/Plaster Carrying Board 1325mm x 600mm. 40, 60 & 80mm thick

    Steico Protect DRY Internal & External Wood Fibre Render/Plaster Carrying Board 1325mm x 600mm. 40, 60 & 80mm thick

    Steico Protect DRY is a natural render/plaster carrying wood fibre insulation board with a tongue and groove profile manufactured in accordance with EN 13171, designed both as an external sheathing board for timber frame constructions or for direct to masonry applications in external wall insulation systems where the render is applied directly to the board and as an internal plaster carrying board for direct fixing to timber frames without the need for a supporting backer board

    It is quite common for architects and designers to specify Protect DRY boards in certain building applications and in combination with a separately specified finish or render system,

    Board size 1325mm x 600mm. Board Coverage: 0.747m2 / board

    Available in 40mm, 60mm & 80mm thicknesses. Other thicknesses are available please contact us for details.

    Price is per board

    Learn More
  2. SPECIAL, DISCOUNTED STOCK!! Steico Protect DRY L S/E External Wood Fibre Render/Plaster Carrying Board. 180mm & 200mm

    SPECIAL, DISCOUNTED STOCK!! Steico Protect DRY L S/E External Wood Fibre Render/Plaster Carrying Board. 180mm & 200mm

    Regular Price: £243.00

    Special Price £135.00

    Steico Protect DRY is a natural render/plaster carrying wood fibre insulation board with a Square Edged profile manufactured in accordance with EN 13171, designed as an external sheathing board for direct to masonry applications & CLT builds in external wall insulation systems where the render is applied directly to the board.

    It is quite common for architects and designers to specify Protect DRY boards in certain building applications and in combination with a separately specified finish or render system,

    Board size 1200mm x 400mm. Board Coverage: 0.48m2 / board

    Available in 180mm & 200mm thicknesses.

    Price is per pallet of 12 boards that covers 5.76m2

    This is part of a returned order so huge discount off rrp

    Learn More
  3. Baumit UniPrimer, Breathable primer for renders and plasters

    Baumit UniPrimer, Breathable primer for renders and plasters

    £23.74
    BaumitUniPrimer is a vapour open primer used to reduce and equalise the suction of substrates, to equalise the colour of the substrate, to enhance the water repellency of the substrate, to mprove adhesion and to enabling bonding to a wide range of substrates.

    BaumitUniPrimer can be used internally and externally

    It is suitable for application on to contact mortars, lime and cement based plasters/renders, concrete and well adhered mineral, silicate and masonry paints.

    Baumit UniPrimer should be well mixed before use, normally with a plaster whisk, and then applied evenly to the surface by brush or roller.

    When using rollers it is often useful to add up to 5% water as this method applies the primer more thickly.

    The primer should then be left for 24 hours before any further coating are applied.

    Yield*: 100 – 125 m²/25 kg bucket on base coats

    20 – 25 m²/5 kg bucket on base coats

    12 m²/5 kg bucket on render coats

    Consumption [m2]*: 0.2 – 0.25 kg/m² on base coats 0.40 kg/ m² on render coats

    *Approximately, dependent on the absorbency of the substrate

    Please remember that this product should only be used between 5C and 30oC and that humidity will affect drying times for this product.

    Price is per bucket Learn More
  4. Baumit MC55 Base/Top Coat Plaster/Render, natural white, fibre reinforced mineral  based mortar 25Kg

    Baumit MC55 Base/Top Coat Plaster/Render, natural white, fibre reinforced mineral based mortar 25Kg

    £18.42

    Baumit MC55 W is a highly versatile easy to use, natural white, fibre reinforced mineral based mortar.

    This versatile product and its naturally sticky nature means that it has excellent adhesion properties on a wide range of substrates and can be used as a base coat for renders, as a reinforcing coat with fibreglass mesh (Baumit Startex),as an adhesive for keying wood fibre boards, as a topcoat finish render or as a remediating topcoat over existing mineral, synthetic or resin based plasters or paintwork. 

    Baumit MC55 W can also be used to prepare smooth concrete, mineral and synthetic renders and some painted surfaces to receive a render.

    When Baumit MultiContact MC 55 W is used as a topcoat finish it must receive a suitable water resistant paint such as Baumit NanoporColour.

    Baumit MC55 W is best mixed, using clean tap water, with a plaster whisk to a smooth lump free consistency or it can be spray applied.

    Yield: 8 m2 at 3 mm  or 5m2 at 5mm or 2.5m2 at 10mm thickness approx. Consumption: 1.0 kg/m2 approx.

    Price is per bag

    Learn More
  5. Glass Fibre Mesh 660 2

    Glass Fibre Mesh 660 1m x 50m Roll

    Regular Price: £97.38

    Special Price £64.61

    A medium guage mesh type 660, 1 x 50mtr

    For reinforcing exterior render base coats 

    Price is per roll

    Learn More
  6. Prepbond WP Lime Render Base Coat 18kg

    Prepbond WP Lime Render Base Coat 18kg

    £23.25

    This is part of a BBA approved system and cannot be purchased online, please call 01793 847 444 to purchase.

    Externally, Prepbond WP lime render undercoat is applied directly to wood fibre and general insulation boards to ensure a good surface bond for renders.  Once applied, it still allows a wall to breathe and provides additional protection against weather so insulation stays dry.

    Prepbond WP is made from natural hydraulic lime combined with natural and recycled aggregates and so can be confidently used for ‘green building' or to meet specific environmental requirements.

    Price is for 1 x 18kg bag

    Learn More
  7. Natural Finish WP, Coloured Lime Render, All Colours 22kg

    Natural Finish WP, Coloured Lime Render, All Colours 22kg

    Regular Price: £18.74

    Special Price £18.12

    This is part of a BBA approved system and cannot be purchased online, please call 01793 847 444 to purchase.

    22kg - a natural lime final coat for use with the Prepbond WP basecoat a through coloured hydraulic lime finish coat with excellent adhesion and weather resistance.  Based on hydraulic lime, natural and recycled aggregates 

    Available in a wide range of colours please call 01793 847 444 for details or choose from the standard colours by clicking on the 'More Info' tab below

    Price is per 22Kg bag

    Learn More
  8. Ejot H1 Eco, Insulation fixing for solid masonry walls, Box of 100

    Ejot H1 Eco, Insulation fixing for solid masonry walls, Box of 100

    Regular Price: £26.79

    Special Price £13.58

    A universal hammer-in insulation anchor, which is preassembled allowing quick and easy installation of rigid wood fibre and other insulating boards to masonry, brick, cob, stone etc can be used with insulation thickneses from 20mm - 250mm.

    Drill through insulation and wall, insert sleeve, hammer in fixing peg.  Plastic coating helps minimise cold bridging  whilst Steel nail won't break.  Available in a selection of sizes - please see drop down menu above.

    • Approved for all building materials
    • Solid Steel Nail (break-proof)
    • Low profile Washer Face
    • Plastic injection element to reduce thermal bridges
    • can be used with an additional spreader washer
    • short embedment depths, minimum drill hole depth
    • High Loads for your security
    • Economic anchor usage
    • premounted mail for quick installation
    • With EPD (Environmental Product Declaration)
    Learn More
  9. Ejotherm STR U 2G,  Screw Set Insulation fixing for solid masonry/Hollow Block walls, Box of 100

    Ejotherm STR U 2G, Screw Set Insulation fixing for solid masonry/Hollow Block walls, Box of 100

    Regular Price: £31.50

    Special Price £26.31

    A universal screw-set insulation anchor, which is preassembled allowing quick and easy installation of rigid wood fibre and other insulating boards to masonry, brick, cob, stone, and hollow blocks or softer substrates, can be used with insulation thickneses from 40mm - 250mm.  Larger fixings are available, call us for pricing and lead times

    Drill through insulation and wall, insert sleeve, screw in fixing peg.  Plastic coating helps minimise cold bridging  whilst Steel screw won't break.  Available in a selection of sizes - please see drop down menu above.

    • Approved for all categories of building material
    • Option to countersink installation - EJOT STR-principal with Ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust (tool required)
    • Up to 40% faster installation
    • Optimised thermal bridging (0.001 W/K)
    • Surface fixed installation using Ejotherm SRT plug
    • Short Embedment depths, high loads for maximum safety and economic anchor usage
    • Permanent contact pressure
    • Premounted screw for quick installation
    • 100% setting control: the countersunk installation of the washer indicates safe anchorage
    Learn More