Dubron Interior Natural Dispersion Paint For Walls & Ceilings (412)
For interior surfaces such as plaster, masonry, woodchip wallpaper, gypsum plasterboards, clay plaster as well as absorbent, sound surfaces treated with dispersion paint. Not suitable for textile or vinyl wall coverings and for existing vinyl coatings
Where the substrate is porous the apply Grava wall primer. Dubron is washable, very economical with a low tendency to drip or splash it has very good water vapour permeability.
A short nap lamb’s wool roller with rounded edges and a natural bristle brush are ideal to use.
Can be tinted to any ratio with URA Colouring Paste.
Permeable to water vapour when completely dried. Coverage strength is in accordance to the German Industrial Norm (DIN) 55 987.
1 litre undiluted is sufficient for approximately 8 m² per coat, i.e. 125 ml/m². This could be considerably less, or more, depending on the condition and absorbency of the surface. Remember to prime porous surfaces with Grava Wall Primer. A test application first will help determine the likely coverage rate.
Dubron natural and ecologically sound paint containg NO VOC's it is a high yeild natural emuslion for interior surfaces such as plaster, masonry, oatmeal wallpaper, gypsum boards, clay plaster as well as absorbent, sound surfaces treated with dispersion paint.
Always apply at temperatures above 12°C (50 °F). Stir thoroughly before use and do not dilute.
Drying time At 23°C and 50% relative humidity, subsequent coats can be applied after 12 hours.
At low temperatures, high relative humidity or reduced absorbency of the surface, drying time can be significantly longer.
Clean equipment immediately after use with warm, soapy water.
Write Your Own Review
Availability: In stock