A selection of consistent, easy to use, general purpose, lime plasters and base coats - just add water to use.
A hugely popular range with a guarantee of consistency, very popular with general plasterers for their ease of mixing and application and for their beautiful finish
Silic8 MPL1 is a mineral based plaster primer which is designed to control many high suction backgrounds whilst still remaining vapour open.
MPL1 can also be used to consolidate problematic surfaces and substrates.
The primer’s course gritted surface provides a key for a new suitable plaster to bond to.
MPL1 has a high bond strength and is the only plaster primer on the market to be independently tested for vapour diffusion to reassure you that water vapour is not trapped in the fabric of your building.
Price is per tinLearn More
Plaster Primer – Breathable ‘Grip Coat’ Granulated Primer for Wall Plaster
Adaptavate Grip Coat is a universal plaster primer suitable for all substrates. A healthier alternative to standard primer, Adaptavate Grip Coat is preservative-free, odour-free, has no toxic chemical emissions and is breathable (vapour diffusion-open). For use on difficult and particularly smooth surfaces, this granulated plaster primer provides better adhesion for follow-up coatings of Breathaplasta.
Applied using a brush or roller, Adaptavate Grip Coat can be over-plastered after only 4-6 hours.
Exact consumption depends on substrate properties, application method and surface quality.
- Excellent choice for priming before plastering.
- Universal primer
- For all wall substrates
- Provides excellent adhesion
- Breathable and non-toxic
Coverage guide: 12m2/Litre
Available in 5 Litre & 10 Litre bucketsLearn More
Silic8 MF2 Ready to Use Filler for fine filling of cracks, skimming and resurfacing plaster 5 Litres£49.00
Silic8 MF2 is a vapour open, premixed mineral filler and light-duty adhesive typically used for fine filling of cracks, skimming and resurfacing of slight blemishes on lime plasters and similar backgrounds and for relocating thin sections of detached plaster.
Use Silic8 MF2 on mineral substrates, historic plaster, stone, brick etc.
Once dry Silic8 MF2 can be sanded to an ultra-fine finish
Silic8 MF2 is highly breathable and ready to use, ideal for decorators and DIY-ers.
Price is per tinLearn More
A ready to use, lime-based and ecological thin coat plaster. Comes in natural white for internal use.
Non toxic, free from perservatives, vapour open,
- Lime/cement plaster and smoother.
- Gypsum-containing plaster.
- Econic, Fermacell and drywall boards.
- Existing and firmly bonded mineral, silicate, dispersion paints and plasters as well as lime putties.
Breathaplasta is a high-performance, quick setting lime plaster that is a healthier alternative to standard internal plasters and helps reduce problems with condensation, damp and mould.
A universal plaster ideally suited to all board and masonry applications, Breathaplasta is versatile and can be used as both base coat and top coat to finish. Its natural lime, the bio-based formulation is flexible, highly breathable and moisture regulating (hygroscopic).
The key benefit of Breathaplasta is its ease of use and quick setting formulation, making it an ideal companion product to wood wool and wood fibre boards which can be lime plastered in just one day. In addition, Breathaplasta’s insulating properties further enhance the high thermal performance of such boards for a healthier and better-insulated finish.
Breathaplasta can be installed using conventional methods onto most substrates, including plasterboard, wood wool and wood fibre boards, brick, block and stone walls.
Breathaplasta is an excellent companion product to wood wool and fibre boards. Ideal for renovation, heritage and conservation or sustainable builds using natural materials.
Primer is not required when applying to wood fibre boards, wood wool boards, brick, masonry or blockwork, but must be applied for plasterboard and is recommended if you are applying to old plaster (Click the MORE INFO tab for the FAQ's) or boards with a smooth surface including MgO boards, calcium silicate, cement particle or other smooth surfaces or where substrates are very porous in order to control suction. Additionally, as a precaution, primer is recommended where a wall or surface presents a mixture of materials or textures.
Yield: 20kg (one bag) covers 5m2 at 4mm thickness OR allow 1kg dry plaster per 1mm thickness per 1m2
Price is per 20kg bagLearn More
Regular Price: £16.21
Special Price £15.98
A universal general purpose high quality single coat plaster for use on a wide range of surfaces including plasterboard, masonry, brickwork, render board.
Can be applied directly to Steico Therm as internal insulation. Solo is our most popular and bestselling one coat plaster thanks to its high quality and versatility. Also use Solo for small areas, patching and repair it is simple easy and quick.
Ready reckoner: Allow 1.6kg's of dry plaster per 1mm thickness per square metre.
Price is per 25kg bag
£15.55Baumit KP36 W is a natural white dry powder plaster with ‘eminently hydraulic’ additives produced in accordance with EN 998-1. Lime plaster with minimal cement content for manual and machine application in internal areas only. Part of the Baumit Klima range of products for healthy living.
- Environmentally friendly vapour open natural white plaster. A mineral, creamy, lime plaster which helps regulate internal air quality.
- Ideal for a sponge floated finish.
- A healthier alternative to gypsum or other cement based products.
- Resistant to impact loading.
- Suitable for application in wet rooms.
Yield: 27 l/sack = ca. 770 l/t approx.,
Consumption: 13 kg/m2 /10 mm thickness approx.Price is per bag Learn More
£15.55Ultra is a thermally insulating lime basecoat for rendering and plastering.
Coverage - Ultra is sold in 15 litre bags these weigh 10kg (approx) they yeild as follows
1 litre per mm of thickness over 1m2
One bag will cover: 1.5m2 at 10mm thick, 1m2 at 15mm thick & 0.6m2 at 25mm thick
Made using modern manufacturing techniques, Ultra’s formulation is based on traditional Natural Hydraulic Lime and light-weight mineral aggregates to make a product unique in the marketplace. Key benefits include:
- Reduced heat losses through the wall
- Enhanced resistance to salts
- Fibre reinforced
- Highly breathable
- Builds out in thick layers
- Mineral ingredients – guaranteed never to rot.
Ultra Natural is a highly insulating lime plaster base coat that is five to ten times thermally more efficient than other plasters when tested in accordance with British Standards. This makes it the perfect plastering base coat for renovations, where it gives an additional insulation layer to internal walls and even more so when Ultra Natural is used as render on outside walls.
Thermally efficient pure lime basecoat. Insulation is given by blown glass granules within the mix. A lightweight, insulating lime base coat for rendering and plastering. Completely free from cement, gypsum, acrylic, ash or other unsuitable additives. Ultra natural can be applied in coats of up to 30mm thick to save time and money
A versatile, general purpose insulating plaster or render base coat suitable for most renovation and refurbishment projects. Principally for use on masonry and brickwork in good condition Use Solo as the top coat to finish.
Price is per 15 litre bag
Regular Price: £15.94
Special Price £14.64
Stipple Coat prepares the wall providing extra adhesion that will keep the base coat where it should be, on the wall and not on the floor. If internal or external masonry walls are very smooth or highly porous, then a standard lime base coat may have difficulty sticking to the surface. Lime green Stipple coat will prepare them ready for the next coat of lime plaster or render.
Walls and ceilings can then be completed using our finish lime plasters for a high quality surface prior to painting. Like Ultra and Duro, Stipple Coat is a lime-based product so it allows the walls to breathe and expel any trapped moisture.
Stipple Coat lime render can be hand-applied or machine sprayed for faster coverage
One 25kg bag will cover approx. 3m² at 5mm thick. This does not include any allowance for wastage.
Each bag weighs 25kg bags, there are 40 bags per palletLearn More