100% Pure Sheeps Wool Insulation Premium

Write a review

Downloads

Downloads

Test Category

No Downloadable

No Specification

full view icon

100% Sheepwool Premium insulation is a dense high performance insulating material with a raw density of 20 kg/m3 and a Thermal Conductivity of 0,0359 W/m2K.

Price is per pack

full view icon

What is 100%Sheepwool Premium Insulation?

The wool is primarily fine black fleece wool. Black wools maintain all the desirable characteristics of white wools, but are less expensive due to limitations of the colour in the dying process. The final colour of the product is dependent on the blend used during production and is likely to vary. Wool fibres have many overlapping scales which make them very flexible and create a memory-effect, where after significant compression, wool will return to its original shape. Wool fibres are hygroscopic by nature and will have a moisture weight content of up to 35%, dependent on the relative humidity of the surroundings. While absorbing this moisture, wool releases energy in the form of heat, thus raising the temperature of its surrounding areas. Naturally releasing this moisture in the warmer seasons, wool creates a cooling effect on the same surroundings.

10 top reasons to use 100%Sheepwool Premium Insulation

  1. The only 100% naturally produced sheep’s wool insulation product on the market. NO Polyester as "filling" material and NO binders.
  2. 100% Sheepwool has been awarded the coveted Nature Plus Seal and has European Technical Approval (ETA)
  3. 100% Sheepwool will keep its insulation value even if moisture is present in the building it is a naturally breathable product
  4. 100% Sheepwool helps to prevent overheating in summer.
  5. 100% Sheepwool keeps it's "loft" through the lifecycle, it does not slump or reduce in thickness over the years unlike polyester or fibreglass
  6. 100% Sheepwool helps to reduce the surface spread of flame.
  7. 100% Sheepwool uses only 15% of the energy to produce when compared with fibreglass and solid foam insulation.
  8. 100% Sheepwool is fully Biodegradable at the end of its life.
  9. 100% Sheepwool  is irritant free and completely safe to use
  10. 100% Sheepwool has no harmful side effects

Where to use 100%Sheepwool Premium Insulation

  1. Attic/Loft Ceiling Level
  2. Attic/Loft Rafter Level
  3. Between Floors
  4. Internal Walls
  5. Ground Floor
  6. External Walls

100%Sheepwool Premium Insulation Size Options

 Thickness mm 

 Dimensions mm 

 Coverage Per Pack m2 

 Weight Per Pack (Kg) 

 Pieces Per pack 

 Maximum Packs/Pallet 

 570mm   width for 600mm Centres

100mm

570mm x 4m

4.56 m2

N/A

2

20

150mm

570mm x 3m

3.42 m2

N/A

2

20

 380mm   width for 400mm Centres

100mm

380mm x 4m

4.56 m2

N/A

3

20

150mm

380mm x 3m

3.42 m2

N/A

3

20

full view icon

Technical Details

 

Thermal conductivity:

0,0359 W/m2K

Combustibility class:

E s1, d0 / Bs1, d0

BKZ in CH 5,3

* Flammability of an acoustic ceiling element

B s1, d0

Flashpoint:

570° C – 600° C

Water vapour diffusion permeability:

1 – 2

**Wool protection:

Ionic Protect**

*Perforated plasterboard panel 12 mm thick, perforation 18/18-5 mm diameter, ISOLENAWOLLE Optimal (thickness 40 mm), 60 mm rear ventilation compliant with European Norm EN 13501-1.

** IONIC PROTECT is a protected trademark.IONIC PROTECT is a biocide-free wool protection system. Ecological, sustainable and permanent. The procedure treats the wool fibre in a plasma-ionic way aiming to protect it against all the negative influences of the building environment. IONIC PROTECT by ISOLENA protects and sustains Sheepwool insulation, acting as a natural moth repellent, it prevents the fibre from being eaten. The performance of IONIC PROTECT has been checked and confirmed by an independent laboratory (CUAP test).

Thermal conductivity

Values of 100% Sheep Wool Insulation Premium has been measured as follows:

Measured Thermal Conductivity (λ)0,0385 W/m2K

Product Certification 

100% Sheep Wool Insulation is certified for use in walls, floors, roofs and ceilings under the European Technical Approval (ETA) 03/0035. The product is certified to carry the CE mark, for distribution throughout EU member states. 

fff

 100% Sheepwool Premium carries the nature Plus Seal

 

Write Your Own Review

You're reviewing: 100% Pure Sheeps Wool Insulation Premium

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value
£74.33

Availability: In stock

* Required Fields

£74.33

You may also be interested in the following product(s)