New
SkamoWall Adhesive 20Kg
Downloads
Downloads
Test Category
-
SkamoWall-UK.INSTALLATION INSTRUCTIONS Size: (472.21 KB)
Downloads: (279)
-
SkamoWall-Adhesive Data Sheet Size: (116.42 KB)
Downloads: (219)
-
SkamoWall-Adhesive-UK.MSDS Size: (92.69 KB)
Downloads: (222)
-
SkamoWall Mould Inhibiting Capacity Test Report Size: (1 MB)
Downloads: (234)
-
SkamoWall VOC Test Size: (566.72 KB)
Downloads: (244)
-
SkamoWall System Components Size: (609.09 KB)
Downloads: (220)
No Downloadable
No Specification
SkamoWall Adhesive is mixed with clean water using a mixing paddle set on a moderate speed until a smooth creamy consistency is achieved.
Leave to stand for 3 minutes. Apply using an 8mm notched trowel.
Typically applied directly to the wall, application to the back of the board is also possible to aid fixing where the adhesive is used to help ensure full contact on rougher surfaces. Open time 2 hours approx.
Full strength achieved after 6 hours.
Supplied as 20 Kg dry powder in a paper sack, covers circa 5m2
Write Your Own Review
£34.10
Per Pack
Availability: In stock
