Soluguard multi surface biocide 5 Litres
SoluGuard Multi-Surface Biocide is a high-strength biocide for removing algae, fungi, moulds and moss growth from a wide range of surfaces. It is supplied ready-for-use in a 5 litre pack.
Surfaces that can be treated include internal walls, roof tiles, concrete surfaces, brick, stone, render and plastic. SoluGuard Multi-Surface Biocide is also suitable for removing algae and moss from driveways, patios and ornamental stone monuments. To greatly minimise regrowth SoluGuard Multi-Surface Biocide can be used prior to treatment with Stormdry Masonry Protection Cream. This will clear existing biological growth from masonry surfaces and also greatly minimise future growth of algae, moss, lichens and moulds that require a damp surface in order to flourish.
- Product benefits of SoluGuard Multi-Surface Biocide include:
- Ready for use (no mixing required)
- Compatible with Stormdry (use prior to masonry protection cream application)
- Low VOC content (low odour, non-flammable)
- Non-staining (will not cause discolouration to treated surfaces)
Price is per 5 Litre Canister
SoluGuard Multi-Surface Biocide (HSE No. 9517)
Each 5 litre pack of SoluGuard Multi-Surface Biocide will treat 10 m2 – 100 m2, depending upon the porosity of the substrate being treated. It can be applied with a brush, roller or by coarse spray. For best results the treated surface should be cleaned of dead growth after 72 hours or more have passed, using clean water and a pressure washer.
SoluGuard Multi-Surface Biocide Application
Remove surface laitance with a masonry brush
Remove any loose mortar, dust or other surface laitance using a masonry brush. When used on exterior surfaces, SoluGuard Multi-Surface Biocide should be applied in dry weather - ideally when no rain is forecast for the next 24 hours.
SoluGuard Multi-Surface Biocide spray application
Apply SoluGuard Multi-Surface Biocide in accordance with the application instructions . Apply 1 litre of product per 2 - 20 m2 of surface. One 5 litre unit can cover between 10 - 100 m2. The coverage will vary depending upon the overall porosity of the substrate to be treated.
Before and after application of SoluGuard Multi-Surface Biocide
For best results, the treated surface should be cleaned after 72 hours using clean water. Where appropriate a pressure washer can be used. This will remove deposits of dead biological growth from the treated surface.
| Soluguard Multi Surface Biocide: Properties
|Recipe type||Liquid, water-based|
|Size(s) & Packaging
|| 5 litre jerry cans
||1 litre covers 2 - 20 m2. A 5 litre pack covers 10 - 100 m2 
Store above 5°C in dry conditions in original closed box. Store in a safe place, keep out of reach of children.
Keep away from food, drink and animal feedstuffs
|| 12 months
|Active ingredient(s)||Quaternary ammonium compounds (QUATS)|
|Effective against||Moulds, algae, lichens and mosses|
 The coverage rate will vary depending upon the roughness and absorbency of the surface, use as a guide only.
Write Your Own Review
Availability: In stock