Adaptavate Grip Coat Vapour Open Primer
Plaster Primer – Breathable ‘Grip Coat’ Granulated Primer for Wall Plaster
Adaptavate Grip Coat is a universal plaster primer suitable for all substrates. A healthier alternative to standard primer, Adaptavate Grip Coat is preservative-free, odour-free, has no toxic chemical emissions and is breathable (vapour diffusion-open). For use on difficult and particularly smooth surfaces, this granulated plaster primer provides better adhesion for follow-up coatings of Breathaplasta.
Applied using a brush or roller, Adaptavate Grip Coat can be over-plastered after only 4-6 hours.
Exact consumption depends on substrate properties, application method and surface quality.
- Excellent choice for priming before plastering.
- Universal primer
- For all wall substrates
- Provides excellent adhesion
- Breathable and non-toxic
Coverage guide: 12m2/Litre
Available in 5 Litre & 10 Litre buckets
Adaptavate Grip coat is a universal plaster primer suitable for all substrates.
A healthier alternative to standard primer, Adaptavate grip coat is preservative-free, odour-free, has no toxic chemical emissions and is ultra-breathable (vapour diffusion-open). Ideal for hard to treat surfaces, ceilings, plasterboard and smooth surfaces with no natural key.
Universal white plaster primer, slightly texturing dispersion with a medium (<0,2 mm)
grain. For interior coatings.
Adhesion promoting primer on difficult substrates for subsequent coating with plaster.
Can be used as a prime coat for Breathaplasta ultra-breathable lime plaster.
Use on plaster, clay, concrete, lime-sand bricks, brickwork, gypsum plasterboard, woodchip, adhesive, wettable old coatings. Mineral substrates, plaster, clay, concrete, lime-sand bricks, brickwork, gypsum plasterboard, cement fibre boards, damp room boards, woodchip, vinyl wallpaper, glass fibre fabrics, adhesive and wettable old coatings; interior latex paints or lacquer coats after a positive compatibility test.
Surfaces must be dry, clean, solid, even, chemically neutral to moderately alkaline, free of oil and grease, adhesive, without bleeding substances, durably able to support
Supplied ready for use, can be diluted with up to 5 % of water.
Remove, brush off, repair brittle surface parts. Remove chalky, crumbling substances by brushing and consolidate where needed. Remove sintered skin by sanding down, parting agents by washing. Fill surface defects, holes, cracks with wall filler and sand down raised edge. Glue loose wallpaper seams, remove adhesive residues. Remove badly adhering, non-adhesive, non-wettable or otherwise unsuitable old coatings entirely.
Treat interior surfaces once with Adaptavate Grip Coat Plaster Primer. Strongly absorptive substrates should be treated twice. It is important to make pretests on bleeding substances, e.g. on fibreboards.
Open-pored (Sd value < 0.01 m), adheres on all wall surfaces, easy application. On inconsistent surfaces, the priming coat can appear slightly patchy or cloudy, e.g. on irregularly filled spots or in cases of strong or varying absorptivity, e.g. on gypsum plasterboard. This is not a flaw, just a visual aspect. Let the Grip coat dry according to instructions before subsequent application of plaster.
Water; mineral fillers; ReplebinÆ, titanium dioxide; cellulose; tensides from rape oil, castor oil; ammonia; thiazoles. Consider possible allergies
Write Your Own Review
Availability: In stock
You may also be interested in the following product(s)
Regular Price: £16.99
Special Price £16.29